Why Have your Chimney inspected?
Services we offer
Hosting by Yahoo! Web Hosting
Chimney Sweeping
Chimney Repair
Safety Inspection
Fire Guard Chimney Lining
Custom Smoke Guard
Chimney Caps
Top Sealing Damper Controls
Video Inspections

Chimney fires can easily occur, sometimes with little or no warning. This is a very dangerous
situation that might take place in your home just because of the presence of an indoor fireplace or
wood burning stove. Chimney fires can be prevented with just a little work.

Burning wood produces smoke; this smoke rises from the chimney and leaves the house and goes
into the outside air. The smoke cools quickly and condenses in the chimney's interior.  Those
particles in the smoke began to bond and adhere to the interior of the chimney forming a flaky or
gummy substance known as creosote.  Creosote is the substance that can cause a chimney fire.
Creosote is highly flammable and can lead to disastrous circumstances under the right conditions.  
Fires resulting from creosote are very difficult to control and extinguish.  It is very important to keep
the amount of creosote in your chimney very low.

All wood is not good for your fireplace.  Green or unseasoned wood is the primary cause of
creosote.  This wood burns at cooler temperatures than seasoned wood thus producing favorable
conditions for the smoke to condense quickly in the chimney yielding indoor air hazards and
promoting faster creosote buildup.  Green or unseasoned wood, if purchased, is usually cheaper
than seasoned wood.  Always buy seasoned wood to burn in your fireplace.  Fires produced from
seasoned wood burn hotter can reduce creosote buildup.  If you cut your own wood, remember to
give it time to become properly seasoned.

Lets face it, every fireplace has some level of creosote.  To avoid a fire started by creosote you
1.  Avoid buring anything that can catch fire easily such as tissue or wrapping papers.
2.  Have your chimney regularly cleaned and inspected by a certified chimney sweep.

Do not use your fireplace or wood stove until  a certified chimney sweep has properly cleaned and
inspected your chimney. Chimney fires can cause a lot of damage to the chimney structure such as
cracks and holes in the chimney wall, the flue, the flue pipe, and the flue liner. If left unattended, the
fire can quickly spread from the flue pipe to surrounding areas.
What is a CSIA Chimney Sweep?
Not every sweep has the knowledge to provide professional quality service. A CSIA qualified sweep
will do more than just sweep chimneys. A certified sweep offers three levels of service. These service
levels indicate the depth of the inspection: Level 1 offers basic services and inspection to readily
accessible areas; level 2 provides additional checks of chimney conditions and interior flues, and
checks of some difficult-to-access spots like crawl spaces and attics; level 3 includes inspection of
those areas that have been enclosed.

CHIMNEY CAPS-  We sell and install 18 gauge Stainless Steel Caps and Copper Caps sold only by
professionals not the discounted caps that you purchase locally. They keep the animals and other
debre out as well as keep sparks from flying all over your roof. They come with a lifetime warranty
against manufactures defects. They also come in oversize sizes to add extra protection to your crown.

TOP SEALING DAMPER CONTROLS- Not just a replacement damper but a energy saving damper.
Imagine a chimney cap that has a inside lid with a rubber silicone gasket that is not found on throat

VIDEO INSPECTIONS-  We use a camera to inspect what cant been seen by birds eye view inside the
chimney looking for cracks and missing mortar between tiles as well as buckled pipes in pre fab

The National Fire Protection Association Code 211 requires that all masonry chimneys have a liner
and that all void areas are properly sealed.

CHIMNEY SWEEPING- A fireplace standard cleaning includes a visual inspection and removal of the
flaky creosote deposits from the fireplace system (the chimney flue, smoke chamber and firebox).
Special rods, chimney brushes, hand brushes and a vacuum are used. It is only after the flaky
creosote is removed (during the standard fireplace cleaning) that glazing can be detected.  Glazing
develops when flaky creosote becomes baked on and requires the use of specialized equipment for
it's removal.  Creosote is flammable and the risk of a chimney fire is present.  If this creosote is
ignited, the intensity of the heat can crack the tile liner and flames pose a fire hazard to the home.

One of the many areas we check during an inspection.  We also run a digital scanner from the bottom
to check for cracks and missing mortar

We also install panels for cracked pre fab fireplaces, install ash dump doors and clean out doors and
install glass doors.